Page 15 - Stainless Steel & Bronze Products
P. 15

417
          Manual Drum Carrier/Rotator

          Here is an efficient, economical way to handle 55 gallon steel drums.  Sturdy handle provides
          leverage for heavy lifting and easily locks drum in position 5" to 11" off floor.  Drum rotates   New
          360°.  Rolls smoothly on two (2) 8" front wheels and one (1) 4" rear swivel caster.  Not for
          use with drums on pallets.
                                                                               model
                                                                               DCR-110-55-SS
                MODEL           ACCEPTABLE     ROTATION    UNIFORM   WEIGHT                                        STAINLESS STEEL & BRONZE
               NUMBER          DRUM TYPES       METHOD    CAPACITY  (POUND)
           DCR-110-55-SS   55 GALLON STEEL    MANUAL      800 lb.    143
          DRUM MUST BE FULL TO ROTATE AT RATED CAPACITY



          Drum Lifter/Transporter                                                         New
          The Stainless Steel Hydraulic Drum Lifter/Transporter is designed to allow the operator to
          load or unload drums on and off the corner of pallets.  Straddle leg design allows the drum
          lifter to glide over standard pallets and grab most 30, 55, or 85 gallon steel and poly drums.
          Drums are raised and lowered easily using the foot pump.  304 grade all stainless steel   model
          construction.  Ideal for wash-down, pharmaceutical, and clean room applications.  Highly   DRUM-LT-SS
          maneuverable on two (2) rigid and two (2) swivel with brake nylon wheels.  Cannot be used
          with fiber drums.

              MODEL       ACCEPTABLE   OVERALL SIZE  BEAK SERVICE  UNIFORM  WEIGHT
              NUMBER      DRUM TYPES    (W x D x H)  RANGE   CAPACITY  (POUND)
           DRUM-LT-SS  STEEL & POLY  48" x 35" x 63"  26" - 71"  800 lb.  310



                                                                                          New
          Drum Trucks

          DBT-SS:  Tilt and lower drums to a horizontal position for dispensing.  Grips all types
          of steel 30, 55, & 85 gallon drums and most rimmed plastic and fiber drums.  Robust,
          non-corrosive design featuring 304 all stainless steel construction.  Adjustable chime hook
          helps to secure the drum. Kickstand for holding the unit in stand-up position.  4-wheel
          design offers exceptional maneuverability through tight areas. 4½" ground clearance with
          four (4) 8" x 2" nylon wheels.
          DBT-SS-DLX:  Easily, efficiently, and safely lift, move, and maneuver a wide range of
          steel and plastic drums.  Automatic grip can be adjusted manually up and down to suit
          different heights. Robust design feature 304 all stainless steel construction. 50% less input   model DBT-SS-DLX  model DBT-SS
          force is required to lift a 1,000 lb. drum compared to standard drum trucks.  To operate,
          simply push the truck to drum and attach the automatic grip to the drum rim.  Rolls
          simply and smoothly on two (2) 8" x 2" nylon wheels.

              MODEL          ACCEPTABLE        OVERALL SIZE  UNIFORM  WEIGHT
              NUMBER         DRUM TYPE          (W x D x H)  CAPACITY  (POUND)
                                                   3
           DBT-SS     STEEL, PLASTIC, FIBER  22¼" x 51 /16" x 37½"  1,000 lb.  70
                                                        1
                                              1
           DBT-SS-DLX    STEEL & PLASTIC   31 /8" x 20" x 55 /8"  1,000 lb.  95


          Variable Height Pail Dispenser

          Variable Height Pail Dispenser provides 24 angle settings for dispensing 5 gallon, 11"
          diameter, plastic or steel pails.  Dispense at any height between 1" and 52" by turning the
          hand cable winch.  Rolls on 4" poly-on-poly rear swivel casters with total lock and 2" steel
          front rigid casters.  Stainless steel construction.

                 MODEL         POUR HEIGHT    CRADLE HEIGHT  UNIFORM  WEIGHT
                NUMBER        LOWERED / RAISED  LOWERED / RAISED  CAPACITY  (POUND)
           LLW-PAILD-100-SS     1" TO 52"     6" TO 62¾"    125 lb.   139
                                                                              model
                                                                              LLW-PAILD-100-SS
                                                                              Pail not included.
   10   11   12   13   14   15   16   17   18   19   20