Multi-Person Work Platforms quickly and safely raise
maintenance personal where they are needed giving you a larger size platform
to accommodate your application. The work platform attaches to fork truck
by inserting forks into fork pockets and securing platform to fork truck.
Unit is made of 2” square tube construction, and base and 4” side curbs are
formed from one piece of heavy gauge sheet for extra strength. Deck has
slip resistant surface, and fork pocket openings of 7” x 2 ¾”. Safety pins
behind each fork and heavy duty chains welded to back frame of platform
which secure around the fork carriage.
Hinged gate on
the front of the unit, with pin safety lock built in. Painted safety yellow.
Disclaimer:
Per ANSI B56-1-2005 section 7.37.3, the floor dimensions of the platform
attachment can not exceed 2X the load center distance listed on the truck
data plate nor have a width greater than the overall width of the truck
(measured across the load bearing wheels) plus 250mm on either side.
The backs on all work platforms backs have 1/2"-13 FEM to meet CAOSHA
standards for the industrial trucks.
As long as the customers truck meets these requirements, they should meet
the requirements set forth by OSHA to have a new data plate created for
their fork truck. Vestil makes no guarantees as to the fork truck
manufacturer generating a new date plate as required by OSHA.
Multi-Person Work Platforms
