(Enter a Model Number or Keyword)
 
 

 

WB01372_.gif (406 bytes) Positive Locking Plate Clamps


model LPC-20

model LPC-40

model LPC-60

Grips sheet until release ring is pulled. Serrated gripper is hardened tool steel. Forged head and gear.  Safety factor is 2 to 1. Power coated finish. Designed to meet ASME B30.20 standards. Do not use plate clamps to lift loads less than 20% of rated capacity. Lift only one plate at a time. Plate must be clean and free of oil. Not designed to use on stainless steel or aluminum plates. For use with materials with a surface hardness to 30 RC (300 HB).

Positive Locking Plate Clamps
Model PDF Minimum
Plate
Thickness
Maximum Plate Thickness Working Load Limit
(lbs)
Min. Plate Weight Throat Depth Bale Opening Wt. (lbs.)
LPC-20 Warranty PDF 0 0.80" 2,000 400 lbs 2.30" 1.75" 9
LPC-40 Warranty PDF 0 1.1875" 4,000 800 lbs 2.95" 2.2" 13
LPC-60 Warranty PDF 0 1.5625" 6,000 1200 lbs 3.34" 1.9" 21

WB01372_.gif (406 bytes) Vertical Plate Clamp with Chain


model CPC-10

model CPC-20

model CPC-40

model CPC-60

Designed for lifting plate material in a vertical position. Lifting eye includes chain for greater versatility. Heavy-duty steel construction for years of reliable use. Meets ASME B30.20 specifications.  Do not use plate clamps to lift loads less than 20% of rated capacity. Lift only one plate at a time.  Plate must be clean and free of oil. Not designed to use on stainless steel or aluminum plates. For use with materials with a surface hardness to 30 RC (300 HB).

Vertical Plate Clamps with Chain
Model PDF Max. Plate
Thickness
Working
Load Limit (lbs)
Min. Plate
Weight
Throat
Depth
Bale
Opening
Wt.
(lbs.)
CPC-10 Warranty PDF 0.6" 1,000 200 lbs 1-1/2" 2.25" 6
CPC-20 Warranty PDF 0.8" 2,000 400 lbs 3" 3.00" 14
CPC-40 Warranty PDF 1" 4,000 800 lbs 3" 3.75" 17
CPC-80 Warranty PDF 1.1875" 6,600 1320 lbs 3" 5.25" 33

WB01372_.gif (406 bytes) Vertical Plate Clamp


model EPC-10

model EPC-20

model EPC-40

model EPC-80

Pivoting bail for easier and more versatile operation. Automatic serrated hardened steel cams and pads.  Drop-forged steel case for maximum strength. Designed to meet ASME B30.20. Warning: Do not exceed the working load limit. Serious bodily injury or property damage may result. Do not use plate clamps to lift loads less than 20% of rated capacity. Lift only one plate at a time. Plate must be clean and free of oil. Not designed to use on stainless steel or aluminum plates. For use with materials with a surface hardness to 30 RC (300 HB).

Vertical Plate Clamps
Model PDF Minimum Plate Thickness Maximum Plate Thickness Working Load Limit (lbs) Min. Plate Weight Throat Depth Bale Opening Wt.(lbs.)
EPC-10 Warranty PDF 0 0.59" 1,000 200 lbs 1.6" 1.81" 5
EPC-20 Warranty PDF 0 0.78" 2,000 400 lbs 2.9" 2.38" 16
EPC-40 Warranty PDF 0 1.00" 4,000 800 lbs 2.9" 2.38" 17
EPC-80 Warranty PDF 0 1.19" 6,600 1320 lbs 3.0" 2.38" 32

WB01372_.gif (406 bytes) Horizontal Plate Clamp


model HPC-20

model HPC-40

model HPC-80

model HPC-100

Designed for lifting plate material in horizontal position. Heavy-duty steel construction for years of reliable use. Meets ASME B30.20 specifications. Do not use plate clamps to lift loads less than 20% of rated capacity. Lift only one plate at a time. Plate must be clean and free of oil. Not designed to use on stainless steel or aluminum plates. For use with materials with a surface hardness to 30 RC (300 HB).

Horizontal Plate Clamps
Model PDF's Maximum
Plate Thickness
Working
Load Limit (lbs)
Min. Plate
Weight
Bale
Opening
Wt.
(lbs.)
HPC-20 Warranty PDF 0.8125" 2,000 400 lbs 1.2" 9
HPC-40 Warranty PDF 1.25" 4,000 800 lbs 1.2" 12
HPC-80 Warranty PDF 1.375" 8,000 1600 lbs 1.2" 15
HPC-100 Warranty PDF 1.4375" 10,000 2,800 lbs 1.2" 17

WB01372_.gif (406 bytes) Non-Marring Plate Clamps

 

These Non-Marring Plate Clamps are designed for lifting and revolving without marring of smooth or polished plates such as stainless steel, aluminum, pre-lacquered plates, wood, marble, concrete, glass, plastic or other fragile surfaces. 

  • Design to meet ANSI B30.20-24 standards. 

  • Lift only one plate at a time.

  • Permanently attached chain sling with a large oval suspension ring

  • Non-marring Polyurethane coated jaws

  • Automatic clamping (manual clamping recommended for fragile materials)

Non-Marring Plate Clamps
Model PDF Overall
Dimensions
Min. Plate
Thickness
Max. Plate
Thickness
Capacity
(lbs)
Min Plate
Weight (lbs)
Wt.
(lbs.)
NMPC-11 Warranty PDF 5"Wx6"Lx8"H 0 0.81" 1100 0 11
NMPC-33 Warranty PDF 5"Wx7"Lx10"H 0 1.13" 3300 0 26
NMPC-11-3 Warranty PDF 5"Wx7"Lx10"H 0 3.94" 1100 0 15
NMPC-11-4 Warranty PDF 5"Wx6"Lx10"H 0.81" 4.25" 1100 0 15
NMPC-11-5 Warranty PDF 5"Wx8"Lx8"H 1.56" 5.5" 1100 0 15

  Freight Quote

 

Copyright 2017
Vestil Manufacturing. 
All rights reserved.  Disclaimer Information.

Terms & Conditions of Sale
 

Notice
Do not use plate clamps to lift loads less than 20% of rated capacity.  Lift only one plate at a time. Plate must be clean and free of oil.

Not designed to use on stainless steel or aluminum plates.  For use with materials with a surface hardness to 30 RC (300 HB).


Download the Owners Manuals in PDF Format:

LPC series Manual

CPC series Manual

EPC series Manual

Try These Other Specialty Lifters:

Beam Tongs

Die Lifting Tongs

Overhead Coil Hooks

Pipe Grabs

 
 

           

  |  Ergonomic  |  Loading Dock  |  Material Handling  |  Drum Handling  |  Packaging  |  Storage Solutions  | Facilities Maintenance | Ladders

Phone (260) 665-7586 Fax (260) 665-1339 E-mail: sales@vestil.com