controlled dumping of material from boxes, crates, and other types of
containers. Lowered height of only ⅜" allows for pallet truck loading and
unloading. Retaining bar adjusts every 2" to accommodate
a wide range of container heights. Each dump height has a hold down range,
see chart. Maximum rotation is 135° yielding a 45 degree dump angle. Unit
may be stopped at any point during the dump cycle. Chute reach is 10" when
fully rotated. Internal 2HP power unit and hand held control standard (5.5
HP power unit on 6,000 pound models). Protective mesh side screens
included. Heavy-duty welded steel construction.
Standard duty cycle equals maximum 15
starts per hour in a normal environment. Duty cycle is calculated by
starts per hour or number of times "up" button is pushed. Jogging
(bouncing of the chute) is NOT recommended.
Industrial quality, 56 frame, 2 HP motor delivers best torque with
minimal amperage draw and maximum life.
Voltage - 460 Volt, 60 cycle, 3 phase. Options available
Cast iron pump with integral valving including pressure relief
valve, check valve, down solenoid valve and pressure compensated flow
24 Volt, fused control circuit to protect operator.
Hydraulic Actuators have internal safety velocity fuse w/stainless
steel spring for emergency lockup.