Designed for use when powered fork trucks are not
available. Pallets can be loaded onto table with pallet trucks and raised
to an ergonomic working height. Safety features include; front side
electric toe guard to protect pinch points during lowering of the table,
velocity fuse to stop falling due to loss of hydraulic pressure, foot
control, maintenance prop, and upper travel limit switch to stop table at
maximum height reducing motor wear. 2HP, 208-230/460V, 3-phase, 60 Hz
totally enclosed motor is remote and can be located up to eight feet away
from table. 3000 psi hydraulic components rating. Optional accordion
skirting available, contact factory.
EHLTG Galvonized
Standard
Specifications:
Industrial quality, 56 Frame, 2 HP Motor delivers best torque with minimal amperage draw
and maximum life
Voltage - 208-230/460 Volt, 60 cycle, 3 phase
Cast iron pump with integral valving including pressure relief valve, check valve, down
solenoid valve, and pressure compensation flow control valve.
NEMA-1 Foot control with guard is standard (NEMA-4 Push button hand control is
available)
24 Volt, fused control circuit.
Hydraulic actuators have internal brass velocity fuse w/ stainless steel spring
Conveniently located air bleed screw on hydraulic actuators
Replaceable deck, main axle pins and bearing
Rollers - Cold finished steel with case carburizing to .010 inch with Rockwell
"C" 40
Pins - Cold rolled and finished to bearing manufacturer's specifications
Bearings - Self-lubricating with compressive strength of 44,000 psi
Swaged on high pressure hose fittings, Pump intake/return hose is 1/2"
Designed for use when powered fork trucks are not
available. Pallets can be loaded onto table with pallet trucks and raised
to an ergonomic working height. Safety features include; front side
electric toe guard to protect pinch points during lowering of the table,
velocity fuse to stop falling due to loss of hydraulic pressure, foot
control, maintenance prop, and upper travel limit switch to stop table at
maximum height reducing motor wear. 2HP, 208-230/460V, 3-phase, 60 Hz
totally enclosed motor is remote and can be located up to eight feet away
from table. 3000 psi hydraulic components rating. Optional accordion
skirting available, contact factory.
