|
|
The model
HDC-900-IDC crushes 55 gallon steel
drums to approximately 6" high and resets automatically to crush
another drum in only 25 seconds. The standard drum compacting feature
allows you to compact products within the drum by simply removing the drum
crushing platen. This convenient design gives you two pieces of equipment
in one. Safety features include a pressure relief valve, which prevents
overload and a door interlock system, which will prevent the motor from
running unless the door is closed.
FEATURES
- 38,000 pounds of crushing power
- Drum head piercer to allow for drum venting
- Built-in fork pockets to aid in transporting
- 6.5 Hp motor is 208-230/460V, 3-phase, 60 Hz
- Protective plastic cover on power unit
- 15 gallon oil reservoir
- Dual speed hydraulic pump provides quick, 25 second cycle time
- 24V NEMA-4 push-button controls with key lockout
- 3-position "COMPACT - OFF - CRUSH" key selector switch
- Mushroom head emergency stop button
- Relief valve to prevent hydraulic system overload
- Door interlock system with key
- Protective cover for indoor and outdoor applications
- Meets OSHA and JIC standards
| Hydraulic
Drum Crusher/Compactor |
| Model |
PDF's |
Description |
Net
Weight (lbs) |
| HDC-900-IDC |
  |
Drum
Crusher/Compactor (standard 3 PH cycle time is 25 seconds) |
1641 |
| HDC-24/7 |
- |
Continuous Duty Rating Motor |
100 |
| HDC-DPN |
- |
Aluminum
Drip Pan (measures 30"Wx20"Lx3"H)(holds 7.5 Gal.) |
31 |
| HDC9-1 |
Single
phase, 3 HP power unit (option for HDC-900-IDC) (Requires 50 Amp
wiring and 40 Amp Breaker) Cycle time increases to approx. 70 seconds |
|
|
|
|
|
|
