Page 7 - Drum Handling Equipment & Specialty Containers
P. 7

285

          Fork Truck Drum Carrier/Rotators
          Easily transport and rotate 55 gallon steel drums using a fork truck. Each unit is provided with a 15
          foot long chain to allow the drum to be rotated up to 360° from the fork truck operator's seat. Fork
          pockets measure 7⅝"W x 2⅝"H usable, except DCR-205-8 and DCR-205-15 usable is 7"W.
          DC powered units include two (2) 12V batteries, on-board charger, and hand held control on
          a 4 foot to 20 foot long coil cord. Safety restraint is used to secure unit to fork truck. Bung Nut
          Wrench, model BNW-I, is included.
               MODEL       CRANK TURNS     DRUM RESTRAINT    UNIFORM   WEIGHT                     model DCR-205-15
               NUMBER     PER 90° ROTATION    METHOD         CAPACITY  (POUND)                                     DRUM, CYLINDER, & PAIL EQUIPMENT
           15 FOOT ROTATION PULL CHAIN
           DCR-205-8          10           33" CHAIN         800 lb.   222
           DCR-205-15         10           33" CHAIN       1,500 lb.   228
           DCR-205-20          15      DUAL RATCHET STRAP   2,000 lb.   229
           12V DC POWERED
           DCR-205-8-DC        --           36" CHAIN         800 lb.   361
           DCR-205-12-DC       --           36" CHAIN       1,200 lb.   346
           DCR-R-HC             HAND CRANK (IN PLACE OF PULL CHAIN)      1
           RRC-2PB            WIRELESS REMOTE CONTROL use w/DC units     1                        model DCR-205-12-DC
          DRUM MUST BE FULL TO ROTATE AT RATED CAPACITY
          Plastic & Fiber Drum Adapters and Upgrades

          Designed to hold and support fiber and plastic drums. The FDA-550 (adjusting arms) or the
          FDA-800 (adjusting arms with nylon strap) unit must be utilized in conjunction with models
          HDC-305, DCR-205, DCR-110, and DCT.
          Model FDA-800 comes complete with both an adjusting arm (FDA-550) and a high strength
          nylon strap (FDA-250). Works with steel, plastic, and fiber drums measuring 12" to 22" in
          diameter and 28" to 36" high.                                             NYLON STRAP     ADJUSTING ARM
          Model FDC-30, attaches to the inner rim of the drum saddle so a 30 gallon steel, fiber, or poly   model FDA-250  model FDA-550
          drum can be used. In any application where it is used with fiber or poly drums, it MUST BE
          used in conjunction with the adjusting arms (either the FDA-550 or FDA-800 models).
          Dual Ratchet Strap, model FDRS, accommodates 30 and 55 gallon drums.
             MODEL                                                      WEIGHT
             NUMBER                      DESCRIPTION                   (POUND)
           FDA-800   FIBER DRUM ADAPTER (INCLUDES FDA-550 & FDA-250)    14       DUAL RATCHET STRAP  STEEL SADDLE
                                                                                     model FDRS      model FDC-30
           FDA-550   ADJUSTING ARM (SOLD SEPARATELY)                    13
           FDA-250   NYLON STRAP (SOLD SEPARATELY)                       3
           FDC-30    STEEL SADDLE                                       18
           FDRS       DUAL RATCHET STRAP                                 12           model FPDL-8-L
           FDRS-V2    PLASTIC/FIBER DRUM OPT DUAL RATCHET STRAPS (2)     24
          Fork Mounted Poly Drum Handlers
          These easy to use plastic drum handlers are designed to handle odd-shaped plastic drums. Includes
          safety restraint for securing unit to the fork truck. Baked-in powder-coated toughness.
          Model FPDL-8-L has adjustable arms that are designed to fit 55 gallon tapered round bottom
          plastic drums. Low drum attachment point allows for use with both open and closed head drums.
          A ratchet strap is supplied to secure the drum to the unit when traveling over rough terrain.
          Model FPDL-11-H is a top lip plastic drum lifter for use with 30 and 55 gallon plastic closed head
          drums. 7⅝" wide x 2 /16" high usable fork tubes on 20½" centers. High drum attachment point
                         9
          for use with top lip at least  /16" high. Will also work with steel and fiber drums.
                             3
              MODEL                      UNIFORM        OVERALL SIZE    WEIGHT                       model FPDL-11-H
             NUMBER      DESCRIPTION     CAPACITY        (W x L x H)   (POUND)
           FPDL-8-L    BOTTOM GRIP       800 lb.     29" x 56½" x 22½"  235
           FPDL-11-H     TOP GRIP      1,100 lb.     29" x 48 /16" x 22½"  196
                                                           7
          Deluxe Combination Fork Mounted Drum Lifter

          Deluxe Combination Fork Mounted Drum Lifter includes attachments to lift any type of drum;
          30 and 55 gallon, steel, plastic, fiber, and open or closed head drums. Includes single Eagle Beak™
          unit and both bottom and top lip Poly Drum Lifters. Uniform capacity will vary depending on
          which attachment you  use. Fork pockets have an inside measurement of 7½" wide by 2½" high.
          Includes a safety restraint for securing unit to fork truck. Welded steel construction. Baked-in   model DFDL-3
          powder-coated toughness. A ratchet strap is supplied to secure the drum to the unit when traveling
          over rough terrain.
              MODEL           ACCEPTABLE             OVERALL SIZE      WEIGHT
             NUMBER           DRUM SIZE               (W x L x H)      (POUND)
           DFDL-3          30 & 55 GALLON         29" x 46 /8" x 28¾"   332
                                                        3
   2   3   4   5   6   7   8   9   10   11   12