The Edge-O-Dock Dockleveler permanently attaches to face of
your dock, providing immediate use while saving valuable floor space. These levelers
never get lost or stolen and they eliminate pinched fingers and toes.
Toe Guards
Grease Zerk Fittings
18" High bumpers to service low trucks
Adjustable torsion spring counterbalance mechanism (FM's only)
Service range 5" above to 5" below dock height
Made of high strength steel to minimize weight (55,000 PSI)
Mechanical
(series FM)
The Mechanical spring counterbalance Edge-O-Dock is operated by hooking the lip and
lifting until the tip of the lip clears the bed of the trailer. With an outward
lifting motion the lip is extended and the dockleveler is lowered to the trailer.
When the trailer departs the lip retracts behind the bumper face automatically.
Units comes complete with bumpers and hook.
Mechanical
Edge-O-Docks
Model
PDF's
Type
Usable Width
Capacity (lbs)
Net Weight (lbs)
FM-0648
-
Mechanical
48" Width
6,000
374
FM-2066
Mechanical
66" Width
20,000
569
FM-2072
Mechanical
72" Width
20,000
572
FM-2566
-
Mechanical
66" Width
25,000
583
FM-2572
-
Mechanical
72" Width
25,000
616
Click the
for the PDF of the Approval Drawing for that model. Click the
for the PDF of the Parts List for that model.
Hand
Pump Hydraulic (series PP)
The Hand Pump Hydraulic system eliminates manual lifting. The hand pump is used
to lift the deck and extend the lip. The operator rotates the relief valve allowing
the deck to descend down and rest upon the trailer. When the trailer departs the lip
drops automatically behind the face of the bumpers. Unit comes complete with
bumpers, hand pump with bracket, cylinder, hydraulic lines and oil.
Hand
Pump Hydraulic Edge-O-Docks
Model
PDF's
Type
Usable Width
Capacity (lbs)
Net Weight (lbs)
PP-1572-36*
Hand
Pump
72"
Width
15,000
752
PP-2066
Hand
Pump
66"
Width
20,000
583
PP-2072
Hand
Pump
72"
Width
20,000
627
PP-2566
Hand
Pump
66"
Width
25,000
622
PP-2572
Hand
Pump
72"
Width
25,000
671
PP-2572-36*
Hand
Pump
72"
Width
25,000
1166
PP-3066
Hand
Pump
66"
Width
30,000
998
PP-3072
Hand
Pump
72"
Width
30,000
1061
* Note: 36 denotes ramp length
Electric
Hydraulic (series PE)
The Electric Hydraulic Edge-O-Dock (1/3 H.P. 115V) is the easiest to operate.
After the truck is backed against the dock, push and hold the control button.
The ramp raises and the lip will extend and rest on the truck bed. When the
truck departs the lip retracts behind the bumpers automatically.
Electric
Hydraulic Edge-O-Docks
Model
Description
Usable Width
Capacity (lbs)
Net Weight (lbs)
PE-1572-36*
Electric
72"
Width
15,000
805
PE-2066
Electric
66"
Width
20,000
644
PE-2072
Electric
72"
Width
20,000
685
PE-2566
Electric
66"
Width
25,000
682
PE-2572
Electric
72"
Width
25,000
732
PE-2572-36*
Electric
72"
Width
25,000
1213
PE-3066
Electric
66"
Width
30,000
1055
PE-3072
Electric
72"
Width
30,000
1118
*NOTE: 36 denotes ramp length.
Edge-O-Dock
Options
Model
Description
Net Weight (lbs)
PP-HP-R
Replacement
Hand Pump
17
FM-HOOK
Lifting
Hook for mechanical unit 36" long (old style)
1
FM-BAR
Pull
Bar for Mechanical Unit (New Style)
13
RB
Rubber
Bumper (Replacement)
60
FM-FM
FM-Series
(Hook Style) To FM-Series (handle Style) Conversion Kit
12
FM-PP
FM-series
to PP-series conversion kit
73
FM-PE
FM-series
to PE-series conversion kit
95
PP-PE
PP-series
to PE-series conversion kit
86
BB
Bumper
block with rubber bumper
90
CE
Curb
edge - 6" channel x 96" long
156
RAMP-2
Approach
ramp 96"Wx12"Lx2"H
108
RAMP-4
Approach
ramp 96"Wx24"Lx4"H
216
AP
Approach
Plate 1/4" thick x 12" long x 96" wide
90
Click the
above for Approval Drawing PDF. Click the
for Parts List PDF. (If you have trouble viewing
the PDF in the browser, try "right clicking" the icon and clicking "save
target as" to save the PDF to your preferred location.)
above for Approval Drawing PDF. Click the
for Parts List PDF. (If you have trouble viewing
the PDF in the browser, try "right clicking" the icon and clicking "save
target as" to save the PDF to your preferred location.)
Mechanical
(series FM)
The Electric Hydraulic Edge-O-Dock (1/3 H.P. 115V) is the easiest to operate.
After the truck is backed against the dock, push and hold the control button.
The ramp raises and the lip will extend and rest on the truck bed. When the
truck departs the lip retracts behind the bumpers automatically.
